Rain Water Sensor Alarm
This circuit gives out an alarm when its sensor is wetted by water.
A 555 astable multivibrator is used here which gives a tone of about 1kHz upon detecting water.
The sensor when wetted by water completes the circuit and makes the 555 oscillate at about 1kHz.
The sensor is also shown in the circuit diagram.
It has to placed making an angle of about 30 – 45 degrees to the ground. This makes the rain water to flow through it to the ground and prevents the alarm from going on due to the stored water on the sensor.
The metal used to make the sensor has to be aluminium and not copper. This is because copper forms a blue oxide on its layer on prolonged exposure to moisture and has to be cleaned regularly.
The aluminium foils may be secured to the wooden / plastic board via epoxy adhesive or small screws.
The contact X and Y from the sensor may be obtained by small crocodile clips or you may use screws
Rain Water Sensor Alarm
I actually wanted to develop a remark to be able to express gratitude to you for these awesome points you are writing on this site. My considerable internet look up has finally been paid with brilliant information to write about with my company. I would express that many of us website visitors are definitely lucky to be in a useful place with many special individuals with beneficial secrets. I feel rather happy to have come across the webpage and look forward to plenty of more exciting moments reading here. Thanks again for all the details.
Android Phones
I found just what I was needed, and it was entrteaining!
Do you mind if I published this article on my website? I would certainly give you credit and a link back to your webpage. Thank you, and don’t hesitate to let me know here!
I am looking for a simple fluxgate magnetometer circuit….possibly to work with metglass strips ??
Thanks